| 智能电地暖的发热原理 |
| 添加时间：2021/8/24 8:48:37 浏览次数： |
| 智能电地暖的发热原理 Heating principle of intelligent electric floor heating 发热电缆的发热元件是由铜、镍合金制成的电阻丝，在一根发热电缆内，任意同等长度距离内的阻值是相等的。发热电缆通过密封防水的接线盒与冷线相连，当冷线被加上电压后，电流在发热电缆中通过，由于受到电阻的阻碍，电能转化为热能并以辐射的形式散发出来，其热效率高达97%以上。热量首先被水泥层所吸收，再通过传导和辐射形式加热房间内的密实物体和空气。根据发热电缆内部结构的不同，又分为单导线和双导线及无屏蔽层导线。每种线的功率范围为每米10W~20W。扭王块模具 高铁遮板模具 阶梯护坡模具 拱形护坡模具 卵形槽模具 保定室内设计培训 保定平面设计培训 The heating element of the heating cable is a resistance wire made of copper and nickel alloy. In a heating cable, the resistance value in any distance of the same length is equal. The heating cable is connected with the cold wire through a sealed and waterproof junction box. When the cold wire is applied with voltage, the current passes through the heating cable. Due to the obstruction of resistance, the electric energy is converted into heat energy and emitted in the form of radiation, and its thermal efficiency is up to more than 97%. The heat is first absorbed by the cement layer, and then the dense objects and air in the room are heated by conduction and radiation. According to the different internal structure of heating cable, it is divided into single conductor, double conductor and unshielded conductor. The power range of each line is 10W ~ 20W per meter. 智能电地暖系统采用"地板低温辐射采暖技术"，由特制柔韧加热电暖线、电子恒温控制器、辅助安装材料(聚苯乙烯挤塑板、钢丝网和穿线软管、水泥、豆石砂等)等材料和部件共同构成了一个安全便捷的独立完整系统。 The intelligent electric floor heating system adopts "floor low-temperature radiant heating technology", which is composed of special flexible heating electric heating line, electronic thermostat, auxiliary installation materials (polystyrene extruded plate, steel wire mesh and threading hose, cement, bean gravel sand, etc.) and other materials and components to form a safe and convenient independent and complete system. |
| 上一页 地暖改造的三大要点 |
| 下一页 地暖系统的供暖原理为辐射传热 |
Copyright © 技术支持：遨游网络