| 施工注意事项 |
| 添加时间：2021/6/9 16:03:55 浏览次数： |
| 施工注意事项 Matters needing attention in construction 1、一般水改根据地方不同可走顶或走地，各冷、热水出水水口必须水平，一般左热右凉，管路铺设需横平坚直。布局走向要安全合理。管卡位置及管道坡度等均应符合规范要求。各类阀门安装应位置正确且平正，便于使用和维修。 1. Generally, water reform can go to the top or floor according to different places. The outlets of cold and hot water must be horizontal. Generally, the outlets are left hot and right cool, and the pipelines should be laid flat and straight. The layout should be safe and reasonable. The location of pipe clamp and the gradient of pipeline should meet the requirements of specifications. All kinds of valves should be installed in the correct and even position for easy use and maintenance. 2、进水应设有室内总阀，安装前必须检查水管及连接配件是否有破损、砂眼、裂纹等现象。 2. The intake water should be equipped with an indoor main valve. Before installation, it is necessary to check whether the water pipes and connecting fittings are damaged, sand holes, cracks and other phenomena. 3、水表安装位置应方便读数，水表、阀门离墙面的距离要适当，要方便使用和维修。 3. The installation position of the water meter should be easy to read, the distance between the water meter and the valve from the wall should be appropriate, and it should be convenient to use and maintain. 4、厨房内如加装饮水机、净水机扭王块模具 高铁遮板模具 阶梯护坡模具 拱形护坡模具 卵形槽模具 保定室内设计培训 保定平面设计培训、等应考虑预先留好上、下水的位置及电源位置。 4. If the kitchen is equipped with water dispenser, water purifier, etc., the position of upper and lower water and power supply should be reserved in advance. 5、冷、热水管均为入墙做法，开槽时需检查槽的深度，冷热水管不能同槽。 5. Both cold and hot water pipes are built into the wall. When grooving, the depth of the groove should be checked. Cold and hot water pipes can not be grooved in the same groove |
| 上一页 施工注意事项 |
| 下一页 装修之前，关于水电地暖改造需要注意哪些？ |
Copyright © 技术支持：遨游网络